Toyota LAND CRUISER 2002 Manual Download Page 102

Page: 102 / 123

* Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation. ”DOLBY” and the double

−

symbol

are trademarks of Dolby Labora-

tories Licensing Corporation.

UNC615

Reverse switch:

You can reverse the tape

by touching the ”

” switch or

”PROG”

button. The display will show the opposite di-

rection after reversing the tape. Also if the

tape reaches the end of one side, it is auto-

matically reversed to the other side.

Fast forward and Rewind switches:

You

can fast forward or fast rewind by touching

the ”

” or ”

” switch.

To stop the tape while it is fast forwarding,

touch ”

”, to stop the tape while it is re-

winding, touch ”

”.

If a tape rewinds completely, the cassette

player will stop and then play the same side.

If a tape fast forwards completely, the cas-

sette player will play the other side of the tape

using the auto

−

reverse feature.

Auto

−

reverse feature:

After the cassette

player reaches the end of a tape, it automati-

cally reverses and begins to play the other

side, regardless of whether the cassette was

playing or fast forwarding.

(b) Manual program selection

Summary of Contents for LAND CRUISER 2002




























































































































Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Toyota LAND CRUISER 2002, Manual, Page: 102 / 123

Search results

Summary of Contents for LAND CRUISER 2002

Reviews: