Toyota LAND CRUISER 2002 Manual Download Page 3

Page: 3 / 123

iii

Safety Instruction

UN003

To use your system as safely as possible, fol-

low all the safety tips shown below.
This system is intended to assist you in

reaching your destination and, if used prop-

erly, can do so. You, as the driver, are solely

responsible for the safe operation of your ve-

hicle and the safety of your passengers.
Do not use any feature of this system to the

extent it distracts you from safe driving. Your

first priority while you are driving should al-

ways be the safe operation of your vehicle.

While you are driving, be sure to observe all

traffic regulations.

Before attempting to use this system while

you are driving, learn how to use it and be-

come thoroughly familiar with it. Read the

entire Navigation System Manual to make

sure you understand the system. Do not al-

low others to use this system until they have

read and understood these and other in-

structions in this manual.
For your safety, some functions may become

inoperable when you start driving. Unavail-

able switches are dimmed. You can input

your destination and select your route only

when the vehicle is not moving.

CAUTION

For safety, the driver should not

operate the navigation system while

he/she is driving. Inattention to the

road and traffic may cause an

accident.

While you are driving, be sure to

follow the traffic regulations and

keep the road condition in mind. If a

traffic sign on the road has been

changed, route guidance may

provide wrong information such as

the direction of a one way street.

Summary of Contents for LAND CRUISER 2002




























































































































Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands

Toyota LAND CRUISER 2002, Manual

Search results

Summary of Contents for LAND CRUISER 2002

Reviews:

Related manuals for LAND CRUISER 2002

Brands by name

Popular brands