Toyota IS300h Manual Download

Page: 2 / 415

IS300h/250_Navi_EE

This manual explains the operation of the Navigation System. Please read this

manual carefully to ensure proper use. Keep this manual in your vehicle at all

times.
The screen shots in this document and the actual screens of the navigation sys-

tem differ depending on whether the functions and/or a contract existed and the

map data available at the time of producing this document.
Please be aware that the content of this manual may be different from the nav-

igation system in some cases, such as when the system’s software is updated.

The Navigation System is one of the most technologically advanced vehicle ac-

cessories ever developed. The system receives satellite signals from the Global

Positioning System (GPS) operated by the U.S. Department of Defense. Using

these signals and other vehicle sensors, the system indicates your present posi-

tion and assists in locating a desired destination.
The navigation system is designed to select efficient routes from your present

starting location to your destination. The system is also designed to direct you

to a destination that is unfamiliar to you in an efficient manner. Map database

is made based on AISIN AW maps, whose information source comes from

NAVTEQ maps. The calculated routes may not be the shortest nor the least

traffic congested. Your own personal local knowledge or “short cut” may at

times be faster than the calculated routes.
The navigation system’s database includes Point of Interest categories to allow

you to easily select destinations such as restaurants and hotels. If a destination

is not in the database, you can enter the street address or a major intersection

close to it and the system will guide you there.
The system will provide both a visual map and audio instructions. The audio

instructions will announce the distance remaining and the direction to turn

when approaching an intersection. These voice instructions will help you keep

your eyes on the road and are timed to provide enough time to allow you to ma-

neuver, change lanes or slow down.
Please be aware that all current vehicle navigation systems have certain limita-

tions that may affect their ability to perform properly. The accuracy of the ve-

hicle’s position depends on satellite conditions, road configuration, vehicle

condition or other circumstances. For more information on the limitations of

the system, refer to page 182.

NAVIGATION SYSTEM OWNER’S MANUAL

NAVIGATION SYSTEM

Introduction

Summary of Contents for IS300h
































































































































































































































































































































































































































Search results

Summary of Contents for IS300h

Reviews:

Related manuals for IS300h

Brands by name

Popular brands

Toyota IS300h, Manual

Search results

Summary of Contents for IS300h

Reviews:

Related manuals for IS300h

Brands by name

Popular brands