Toyota IS300h, Manual

Page: 167 / 415

167
4. MY MEMORY
3
N
AVIGATIO
N S
Y
STEM
IS300h/250_Navi_EE
1
Display the “My memory” screen.
(

P.148)
2
Select “Copy from USB”.
 If a password has already been set,
enter the password. For instructions on
setting a password:

P.166
 If there are multiple memory points
stored on the USB memory, select the
memory points to be copied and select
“Start”.
3
Check that a progress bar is being
displayed while the data copy is in
progress.
 To cancel this function, select “Can-
cel”.
4
Check that a confirmation screen is
displayed when the operation is
complete.
COPYING FROM A USB
MEMORY
Memory points that have been
backed up can be downloaded to the
navigation system using a USB
memory.
To use this function, it is necessary to
connect a USB memory to the sys-
tem. (

P.165)
INFORMATION

Memory points that are located out-
side of the map’s data range cannot be
registered.

A maximum of 500 memory points
can be registered.

When there are 21 or more memory
points stored on a USB memory, only
20 memory points will be displayed at
a time.

If memory points which have the
same name are already stored in the
navigation system, the system may
not update those memory points.