OVERVIEW
FEATURES & OPERATIONS
TOYOT
A SAFETY SENSE
SAFETY & EMERGENCY FEATURES
13
Door-Power Liftgate (back door) (
if equipped
)
If the moon roof is open, pressing the switch
closes it up to the tilt-up position.
If the shade is closed past the half-open position
when the switch is pressed, it will open up to the
half-open position.
The moon roof stops slightly before the fully open position to reduce wind noise and the
shade opens fully. Slide the switch again to fully open or close the moon roof.
Push
Push and hold
Instrument panel
Open and close
Open: Push and hold
Close: Push and hold again
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Refer to the Owner’s Manual for more details.
Open only
Remote
control
(without
Smartkey)
Remote
control
(with
Smartkey)
1. When the liftgate reaches the desired height, push the rear liftgate close-button (on the
door jam of the liftgate) once. Press and hold the button until the buzzer sounds.
2. To reset the height, with the liftgate open and not moving, press and hold the rear liftgate
close-button until it buzzes, and continue to hold until it buzzes again -then let go. Push
the same button to close the liftgate. When you next open the liftgate it will open to the
maximum height.
3. The height can also be set through the “Setup” screen on the audio display. Setup >
Vehicle Customization > Other Vehicle Settings > Power Back Door Opening Adjust.
Through this screen, there are 5 height options to choose from.
NOTE: If the liftgate has stopped operating, check inside the glove box, on the left side, to
ensure the PWR DOOR OFF button has not been pushed.
For detailed instructions, see Owner’s Manual.
PROGRAMMABLE POWER LIFTGATE
TILTING OPERATION
TILTING OPERATION
2017_Highlander_QRG_V1_1.indd 13
11/22/16 11:28 PM
