Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 16 of 16
COMPLETION
IMPORTANT
1.
Ensure the interior wiring and any excess antenna cable
is positioned to avoid fouling and rattling (cable tie as
required at a minimum of every 200 mm. Use self-adhesive
cable tie mounting blocks where necessary).
2.
From the engine bay side, seal the antenna cable grommet
entry point with an automotive grade sealant and secure
with a cable tie.
3.
Neatly cable tie the antenna cable to the existing engine
bay wiring harness where indicated to avoid fouling,
rattling or a possible rubbing condition.
4.
Refit all remaining interior and exterior parts previously
removed.
5.
Check UHF CB transceiver operation.
