Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 10 of 16
UH9060S / 9080S
14.
Disconnect the lead wire and pull the antenna cable into
the passenger’s side footwell.
Power Lead Patch Harness - UH9000S
1.
Route the power lead patch harness from the driver’s side
footwell, behind the bottom edge of the console box
assembly to the rear power socket connector.
2.
Disconnect the rear power socket connector and dehouse
the (2) connector pins from the rear power socket
connector
[1]
.
3.
House the (2) removed pins in the free power lead patch
harness connector
[2]
.
4.
House the (2) free power lead patch harness pins into the
existing rear power socket connector
[3]
.
5.
Connect the existing rear power socket connector to the
rear power socket
[4]
.
IMPORTANT
6. Refer to the following diagram for wiring details
PRADO
1
Power
socket
Existing vehicle
harness
Existing vehicle power
socket connector
Existing vehicle power
socket connector
Power
socket
4
To UHF CB
transceiver
Power lead
patch harness
Existing vehicle power
socket connector
To UHF CB
transceiver
3
Existing vehicle
harness
Power lead
patch harness
2
Existing vehicle
harness
Power lead
patch harness
To UHF CB
transceiver
1
2
1
2
1
2
