Toyota FJ cruiser 2013 Owner'S Manual Download Page 462

Page: 462 / 530

488

5-2. Steps to take in an emergency

Position the jack at the correct
jack point as shown.

Front
Rear

Make sure the jack is positioned
on a level and solid place.

Raise the vehicle until the tire is
slightly raised off the ground.

When positioning the jack under
the  rear  axle  housing,  make
sure  the  groove  on  the  top  of
the  jack  fits  with  the  rear  axle
housing.

Remove all the wheel nuts and
the tire.

When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.

Front

Summary of Contents for FJ cruiser 2013



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands

Toyota FJ cruiser 2013, Owner'S Manual

Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands