Toyota FJ cruiser 2013 Owner'S Manual Download Page 127

Page: 127 / 530

149

2-3. Operating the lights and wipers

Wh
en
drivin

Turning on the high beam headlights

With the headlights on, push
the lever forward to turn on the
high beams.

Pull the lever back to the center
position to turn the high beams
off.

Pull the lever toward you to
turn on the high beams.

Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.

Type B

The  daytime  running
lights turn on.
The side marker, park-
ing,  tail,  license  plate,
outside  rear  view  mir-
ror

illumination

(if

equipped),

daytime

running

lights

and

instrument panel lights
turn on.
The headlights and all
lights

listed

above

(except daytime run-
ning lights) turn on.

Summary of Contents for FJ cruiser 2013



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands

Toyota FJ cruiser 2013, Owner'S Manual

Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands