manualshive.com logo in svg

Toyota FJ cruiser 2013, Owner'S Manual

Share
Download
Toyota FJ cruiser 2013 Owner'S Manual Download Page 440

466

5-1. Essential information

■

Emergency towing procedure

The  engine  switch  must  be  in  the  ACC  (engine  off)  or  the  ON
(engine running) position.

4WD models with an automatic transmission: Shift the front-wheel
drive control lever in H2.
4WD models with a manual transmission: Unlock the center differ-
ential.

Put the shift lever in N.

Release the parking brake.

CAUTION

■

Caution while towing

●

Use extreme caution when towing the vehicle. 
Avoid  sudden  starts  or  erratic  driving  maneuvers  which  would  place
excessive  stress  on  the  emergency  towing  eyelet  and  the  cables  or
chains. Always be cautious of the surroundings and other vehicles while
towing.

●

If the engine is not running, the power assist for the brakes and steering
will not function, making steering and braking more difficult.

NOTICE

■

To prevent causing serious damage to the transmission 
(vehicles with an automatic transmission)

Never tow this vehicle from the rear with the four wheels on the ground. 
This may cause serious damage to the transmission.

■

Emergency towing eyelet precautions

●

Before emergency towing, check that the eyelet is not broken or damaged.

●

Fasten the towing cable or chain securely to the eyelet.

●

Do not jerk the eyelet. Apply steady and even force.

●

To  avoid  damaging  the  eyelet,  do  not  pull  from  the  side  or  at  a  vertical
angle. Always pull straight ahead.

Summary of Contents for FJ cruiser 2013



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands