Toyota FJ cruiser 2013 Owner'S Manual Download Page 428

Page: 428 / 530

453

4-3. Do-it-yourself maintenance

Mainten

ance

■

After a fuse is replaced

●

If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (

→

P. 454)

●

If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.

■

If there is an overload in the circuits

The fuses are designed to blow, protecting the wiring harness from damage.

CAUTION

■

To prevent system breakdowns and vehicle fire

Observe the following precautions.
Failing to do so may cause damage to the vehicle, and possibly a fire or
injury.

●

Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.

●

Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.

●

Do not modify the fuse or the fuse box.

NOTICE

■

Before replacing fuses

Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.

Summary of Contents for FJ cruiser 2013



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands

Toyota FJ cruiser 2013, Owner'S Manual

Search results

Summary of Contents for FJ cruiser 2013

Reviews:

Brands by name

Popular brands