Toyota ECO 26 A-SP20, Instruction Manual

Page: 49 / 52

49
If the above treatments do not solve the problem, contact
the service center as described in your warranty.
When calling for service, please note the MODEL and
SERIES that are inscribed on the back of your sewing
machine.
SP20 SERIES / SERIE SP20 SERIES / SERIE
max 15W max 15W Total 85W Total 85W
MODEL / MODELE SP MODEL / MODELE SP
220-240V 220-240V
50Hz 50Hz
Manufacturer/ : ZHEJIANG AISIN ELITE
Fabricant
MACHINERY & ELECTRIC
CO., LTD.P.R.C.
Importer/ : EUROPE S. A.
Importateur
MADE IN P. R. C. / FABRIQUE A P.R.C.
Designed and engineered by Designed and engineered by
AISIN SEIKI JAPAN
AISIN SEIKI JAPAN
Trouble Cause Countermeasure Page
Missed
stitches
The needle is incorrectly installed Install the needle correctly
25
The needle is bent Use a straight needle 25
The needle and thread are not
appropriate for the fabric Sew with a needle and thread
appropriate to the fabric
26
The upper thread is not
correctly threaded
Thread the upper thread correctly 16
The fabric
wrinkles /
puckers
The tension of the upper
thread is too tight
Adjust the thread tension 32
The upper and lower thread
are not correctly threaded Thread the upper and lower thread
again
15, 16
The needle is too thick for the cloth Use a needle appropriate to the fabric
26
The needle is burred Replace with a good needle 25
Too much
lower thread
showing on
right side of
the fabric
The lower thread is incorrectly threaded Thread the lower thread correctly
15
The tension of the upper
thread is too tight
Adjust the thread tension 32
The bobbin is not correctly
inserted in the bobbin case Insert the bobbin in the bobbin
case correctly
15
Too much
upper thread
showing on
wrong side of
the fabric
The upper thread is not
correctly threaded
Thread the upper thread correctly
16
The tension of the upper
thread is too loose
Adjust the thread tension
32
The upper thread is not correctly
threaded (not threaded through
the thread guide)
Thread the upper thread correctly
16
Stretch
stitches cannot
be sewn
The stitch length dial is not set
to setting “A – K” or “L – S” Set the stitch length dial to the
appropriate setting
42
The stitch length dial and the
pattern selection dial are set to
different settings Select the same setting on the
stitch length dial and the pattern
selection dial
42
The needle
cannot be
threaded with
the needle
threader
The needle position is too low
Turn the handwheel so that the
line is at the top
18
Needle no.9 is being used Use needle no. 11 through 16 26
The needle is incorrectly installed Install the needle correctly
25
The needle is bent Use a straight needle 25
The thread has not been
correctly passed through the
needle bar thread guide
Pass the thread through the
needle bar thread guide correctly
18