37
8
Caution
Use the buttonhole cutter to cut the center,
making sure not to cut the stitches.
Note: If a marking pin is put in the
bar-tack area it helps to prevent
cutting the bar-tack with the
buttonhole cutter.
• Use the buttonhole adjustment screw
to adjust the balance between the
stitches (rear side).
• Adjust by turning with the
-
screw
driver of your own.
• Don’t turn the screw more than 90°.
Note: The original position of buttonhole
adjustment screw may vary
according to the model of machine.
If the stitches are loose on the right side
of the buttonhole, turn slightly in the “-”
direction.
If the stitches are loose on the left side
of the buttonhole, turn slightly in the “+”
direction.
Adjustment of buttonhole balance
Buttonhole
adjustment
screw
When using the buttonhole cutter to cut the
buttonholes, do not hold the fabric in front of the cutter.
Doing so could cause an injury to your hand.
Buttonhole
cutter
Summary of Contents for ECO 26 A-SP20
Page 2: ......
Page 7: ...7 Memo...
