Toyota Corolla 2005 Owner'S Manual Download Page 88

Page: 88 / 304

’05 Corolla_U (L/O 0409)

188

2005 COROLLA from Sep. ’04 Prod. (OM12891U)

7. “TUBELESS” or “TUBE

TYPE”—

A tubeless tire does not

have a tube inside the tire and air

is directly filled in the tire. A tube

type tire has a tube inside the tire

and the tube maintains the air

pressure.

8. Load limit at maximum cold tire

inflation pressure—

For details,

see “Checking and replacing tires”

on page 264.

9. Maximum cold tire inflation

pressure—

This means the pres-

sure to which a tire may be in-

flated. For details about recom-

mended cold tire inflation

pressure, see “Tires” on page 286.

10.Summer tire or all season

tire—

An all season tire has “M+S”

on the sidewall. The tire not

marked with “M+S” is a summer

tire. For details, see “Types of

tires” on page 200.

Summary of Contents for Corolla 2005

















































































































































































































































































































Search results

Summary of Contents for Corolla 2005

Reviews:

Related manuals for Corolla 2005

Brands by name

Popular brands

Toyota Corolla 2005, Owner'S Manual

Search results

Summary of Contents for Corolla 2005

Reviews:

Related manuals for Corolla 2005

Brands by name

Popular brands