Toyota Corolla 2005 Owner'S Manual Download

Page: 286 / 304

’05 Corolla_U (L/O 0409)

168

2005 COROLLA from Sep. ’04 Prod. (OM12891U)

To open the glove box door, pull the
lever.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.

Type A

Type B

Type C

To use the box, pull on the handle.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the auxiliary box
closed while driving.

Do not use the auxiliary box as an
ashtray.

Glove box

Auxiliary boxes

Summary of Contents for Corolla 2005

















































































































































































































































































































Search results

Summary of Contents for Corolla 2005

Reviews:

Related manuals for Corolla 2005

Brands by name

Popular brands

Toyota Corolla 2005, Owner'S Manual

Search results

Summary of Contents for Corolla 2005

Reviews:

Related manuals for Corolla 2005

Brands by name

Popular brands