Toyota Corolla 2005 Owner'S Manual Download Page 89

Page: 89 / 304

’05 Corolla_U (L/O 0409)

189

2005 COROLLA from Sep. ’04 Prod. (OM12891U)

This illustration indicates typical tire

symbols.

1. DOT and Tire Identification

Number (TIN)—

For details, see

“—DOT and Tire Identification

Number (TIN)” on page 190.

2. “TEMPORARY USE ONLY”—

compact spare tire is identified by

the phrase “TEMPORARY USE

ONLY” molded into its sidewall.

This tire is designed for temporary

emergency use only. For details,

see “Compact spare tire” on page

220.

3. Tire ply composition and mate-

rials—

Plies mean a layer of rub-

ber

−

coated parallel cords. Cords

mean the strands forming the plies

in the tire.

4. Tire size—

For details, see “—Tire

size” on page 191.

5. “TUBELESS” or “TUBE

TYPE”—

A tubeless tire does not

have a tube inside the tire and air

is directly filled in the tire. A tube

type tire has a tube inside the tire

and the tube maintains the air

pressure.

—Tire symbols

(compact spare tire)

Summary of Contents for Corolla 2005

















































































































































































































































































































Search results

Summary of Contents for Corolla 2005

Reviews:

Toyota Corolla 2005, Owner'S Manual, Page: 89 / 304

Search results

Summary of Contents for Corolla 2005

Reviews: