manualshive.com logo in svg

Toyota Corolla 2005, Operating Manual

The Toyota Corolla 2005 Operating Manual is a comprehensive guide that helps you navigate and understand the functionalities of your vehicle. Download this manual for free from manualshive.com, to access step-by-step instructions, essential maintenance tips, and valuable insights, ensuring a smooth driving experience.

Share
Download
background image

’05 Corolla_U (L/O 0409)

127

2005 COROLLA from Sep. ’04 Prod. (OM12891U)

If the warning light comes on:

1. Adjust the tire inflation pressure to

the specified level as soon as pos-
sible. (See “Tires” on page 286 in
Section 8.)

2. Push the tire pressure warning sys-

tem reset switch for a few seconds
and make sure the warning light
goes off.

If the light remains on after the reset
switch has been pushed, have the tire
pressure warning system checked at your
Toyota dealer.

If you have a flat tire, replace it with the
spare tire. For details, see “If you have
a flat tire” on page 219 in Section 4.

If the warning light blinks once every
second:

The low tire pressure warning system may
be malfunctioning. Contact your Toyota
dealer.

If the warning light blinks once every
three seconds:

The low tire pressure warning system
needs to be initialized. Reset the system
with the tire pressure warning system re-
set switch. (To reset the system, see
“TIRE PRESSURE WARNING SYSTEM
RESET SWITCH”.)

The tire pressure warning system does
not function properly under certain cir-
cumstances. In the following cases, the
low tire pressure warning light may not
come on even if the tire inflation pres-
sure is low, or it may come on when
the tire inflation pressure is actually
normal.

A compact spare tire, snow tires, or
tire chains are used.

The tire inflation pressure is excessive-
ly higher than specified, or tire inflation
pressure suddenly drops due to burst-
ing or other causes.

The vehicle is driven on a slippery
road surface such as rough or frozen
roads.

The vehicle speed is less than 30 km/h
(19 mph) or more than 100 km/h (62
mph), and the driving duration is less
than 5 minutes.

The tires differ in tread pattern or
manufacturer.

The tires are not the specified size.

The tread wear is very different among
the installed tires.

Rapid acceleration/deceleration or
sharp turns is continued.

Towing a trailer.

The loading is over the limit or imbal-
anced.

Initialization was not performed correct-
ly after replacing or rotating tires or
wheels.

The outside temperature is below 0

C

(32

F) or above 40

C (104

F).

CAUTION

When the tire pressure warning light
comes on, observe the following in-
structions:

Adjust the tire inflation pressure to
the specified level as soon as pos-
sible.

Avoid abrupt steering wheel maneu-
vering and braking. If the vehicle
tires deteriorate, you could lose
control of the steering wheel or the
brakes, causing death or serious in-
jury.

Summary of Contents for Corolla 2005










































































































































































































































































































Reviews:

No comments

Related manuals for Corolla 2005

Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
Saab 92X Owner'S Manual preview
92X
Brand: Saab Pages: 445
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146

Brands by name

Popular brands

Load more brands