manualshive.com logo in svg

Toyota Corolla 2005, Operating Manual

The Toyota Corolla 2005 Operating Manual is a comprehensive guide that helps you navigate and understand the functionalities of your vehicle. Download this manual for free from manualshive.com, to access step-by-step instructions, essential maintenance tips, and valuable insights, ensuring a smooth driving experience.

Share
Download
background image

’05 Corolla_U (L/O 0409)

118

2005 COROLLA from Sep. ’04 Prod. (OM12891U)

(b) Overdrive switch

You can select either a third gear (with
overdrive off) or fourth gear (with over-
drive on) by pushing this switch.

To turn the overdrive off, push the switch.
The “O/D OFF” indicator light should come
on. To turn the overdrive on again, push
the switch again. The “O/D OFF” indicator
light should go off.

Always drive your vehicle with the over-
drive on for better fuel economy and
quieter driving.

If the engine is turned off when the over-
drive is off and restarted, the overdrive
will be on automatically.

Vehicles with cruise control—When the
cruise control is being used, even if you
downshift the transmission by pushing and
releasing the overdrive switch, engine
braking will not be enabled because the
cruise control is not cancelled.

For ways to decrease the vehicle speed,
see “Cruise control” on page 130 in this
Section.

(c) Normal driving

1. Start the engine as instructed in “How

to start the engine” on page 202 in
Section 3. The transmission must be in
“P” or “N”.

2. With your foot holding down the brake

pedal, shift the selector lever to “D”.

When the lever is in the “D” position, the
automatic transmission system will select
the most suitable gear for running condi-
tions such as normal cruising, hill climb-
ing, hard towing, etc.

Always turn the overdrive on for better
fuel economy and quieter driving. If the
engine coolant temperature is low, the
transmission will not shift into overdrive
gear even with the overdrive on.

CAUTION

Never put your foot on the accelera-
tor pedal while shifting.

3. Release the parking brake and brake

pedal. Depress the accelerator pedal
slowly for smooth starting.

(d) Using engine braking

To use engine braking, you can downshift
the transmission as follows:

Push the overdrive switch. The “O/D
OFF” indicator light will come on and
the transmission will downshift to third
gear.

Shift into the “2” position. The trans-
mission will downshift to second gear
when the vehicle speed drops down to
or lower than 105 km/h (65 mph), and
stronger engine braking will be en-
abled.

Shift into the “L” position. The trans-
mission will downshift to first gear
when the vehicle speed drops down to
or lower than 49 km/h (30 mph), and
maximum engine braking will be en-
abled.

Summary of Contents for Corolla 2005










































































































































































































































































































Reviews:

No comments

Related manuals for Corolla 2005

Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
BrandMotion 1009-6503 Installation Instructions Manual preview
1009-6503
Brand: BrandMotion Pages: 8
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2
Xblitz XME PRO User Manual preview
XME PRO
Brand: Xblitz Pages: 56
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Bestop 51252 Installation Instructions preview
51252
Brand: Bestop Pages: 4
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Easee Base 1-Way User Manual / Installation Manual preview
Base 1-Way
Brand: Easee Pages: 21
Quadratec QuadraTop Adventure Top S Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 13

Brands by name

Popular brands

Load more brands