Toyota Corolla 1998, Operating Manual

Page: 65 / 208

1998 COROLLA(U)
65
2. To remove the child restraint system,
press the buckle- release button and al-
low the belt to retract.
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten the
top strap.
See the following instructions to install the
anchor bracket.
Bolt
Anchor
bracket
190.75 mm
(7.5 in.)
216.5 mm (8.5 in.)
Spacer
153.0 mm
(6.0 in.)
On the filler panel behind the rear seat
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the filler panel.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5—24.7 N
⋅
m (1.68—2.52
kgf
⋅
m, 12.2—18.2 ft
⋅
lbf).
—Top strap anchors and
locations