manualshive.com logo in svg

Toyota Corolla 1998, Operating Manual

The Toyota Corolla 1998 Operating Manual is a comprehensive guide that provides step-by-step instructions and essential information for owners of the Toyota Corolla model year 1998. This manual is available for download, completely free of charge, from manualshive.com, allowing users to easily access and reference the manual whenever needed.

Share
Download
background image

1998 COROLLA(U)

44

CAUTION

The SRS side airbag system is de-
signed only as a supplement to the
primary protection of the driver
side and front passenger side seat
belt systems. The front seat occu-
pants can be killed or seriously in-
jured by an inflating airbag if they
do not wear the available seat
belts. During sudden braking just
before a collision, an unrestrained
driver or front passenger can move
sideward into direct contact with or
close proximity to the airbag which
may then deploy during the colli-
sion. To obtain maximum protection
in an accident,  the driver and all
passengers in the vehicle must
wear their seat belts. Wearing a
seat belt during an accident re-
duces the chances of death or seri-
ous injuries or being thrown out of
the vehicle. For instructions and
precautions concerning the seat
belt system, see “Seat belts” in this
chapter.

Improperly seated and/or restrained
infants and children can be killed
or seriously injured by a deploying
airbag. An infant or child who is
too small to use a seat belt should
be properly secured using a child
restraint system. Toyota strongly
recommends that all infants and
children be placed in the rear seat
of the vehicle and properly re-
strained. The rear seat is the safest
for infants and children. For in-
structions concerning the installa-
tion of a child restraint system, see
“Child restraint” in this chapter.

Do not allow the child to lean
against the front door even if the
child is seated in the child restraint
system. It is dangerous if the side
airbag inflates and the impact could
cause death or serious injury to the
child. For instructors concerning
the installation of a child restraint
system, see “Child restraint” in this
chapter.

Do not lean against the front door
when the vehicle is in use. The side
airbag inflates with considerable
speed and force; you may be killed
or be seriously injured.

Do not apply excessive weight to
the outer side of the front seats on
vehicles with side airbags.

The child head should not be
leaned against the vicinity of the
part where the side airbag acti-
vates.

Summary of Contents for Corolla 1998

















































































































































































































Reviews:

No comments

Related manuals for Corolla 1998

Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2

Brands by name

Popular brands

Load more brands