Toyota Corolla 1998 Operating Manual Download Page 195

Page: 195 / 208

1998 COROLLA(U)

199

4. Release the bulb retaining spring

and remove the bulb. Install a new
bulb and the bulb retaining spring.

To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.

5. Install the rubber cover with the

”TOP” mark upward, and snuggle on
the boss. Insert the connector.

Make sure the rubber cover fits snugly on
the connector and the headlight body.

Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

Use a Phillips- head screwdriver.

—Parking, front side marker
and front turn signal lights

Summary of Contents for Corolla 1998

















































































































































































































Search results

Summary of Contents for Corolla 1998

Reviews:

Related manuals for Corolla 1998

Brands by name

Popular brands

Toyota Corolla 1998, Operating Manual

Search results

Summary of Contents for Corolla 1998

Reviews:

Related manuals for Corolla 1998

Brands by name

Popular brands