BODY ELECTRICAL - SMART KEY SYSTEM
BE-107
5. Entry Function Operation
General
The entry function has the following functions.
Function
Outline
Mechanical Key
[See page BE-106]
The key consists of a mechanical key, a transmitter for the wireless door lock remote
control and a transceiver for the smart key system, and a transponder chip for the HV
immobilizer control.
Wireless Door Lock
Remote Control
[See page BE-108]
This function is a convenient system for locking and unlocking all the doors or trunk,
at a distance. The operation is same as wireless door lock remote control system.
Entry Illumination
[See page BE-108]
When a key enters the actuation area of front door oscillators, the front interior light,
and power switch illumination illuminate.
Entry Unlock
[See page BE-109]
When a key is located in the actuation area front door oscillators, the door will unlock
after the inside of an outside door handle is touched.
Entry Unlock
Mode Switching
[See page BE-110]
Allows selection of one of two modes that can be operated with the entry unlock
function.
Driver Door Mode
All Door Mode
Entry Lock
[See page BE-111]
When a key is located in the actuation area of either front door oscillator and the power
source is OFF, the door can be locked by merely pressing the lock switch on the outside
door handle.
Trunk Open
[See page BE-112]
When a key is in the actuation area of the trunk outer oscillator, the trunk can be opened
by merely pressing the trunk open switch.
Prevention of Key
Confinement
[See page BE-113]
Prevents the confinement of the key in the vehicle by the door being locked with
the outside door handle while the key is still inside the vehicle.
If the trunk lid is closed while the key is still in the luggage compartment, the
warning buzzer sounds. If the trunk open switch is operated for 2 seconds during
this period, the trunk lid can be opened.
Warning
[See page BE-115]
When any of the situations below occur, the smart key system causes the certification
ECU to sound the buzzer in the combination meter and the wireless door lock buzzer,
and indicate a warning on the multi-information display in order to the alert the driver.
An exit warning if the shift lever is in a position other than P and the power source
is a mode other than OFF.
An exit warning if the shift lever is in P and the power source is a mode other than
OFF.
A warning if the occupant leaves with the key in inappropriate circumstances.
A warning if the power switch is operated while the key is outside the actuation area.
A warning if the entry lock button on the door handle is operated while the key is
inside the vehicle.
A warning if the key battery is weak.
Battery Saving
[See page BE-125]
If the key remains within the actuation area of the front door oscillators, the system
maintains periodic communication with key. Therefore, if the vehicle remains parked
in that state for a long time, the key battery and the vehicle battery could be drained.
Key Cancel
[See page BE-126]
The following key functions can be cancelled by following certain procedures.
Entry unlock / lock
Trunk open
Prevention of key confinement
Warning
Key Code
Registration
[See page BE-126]
A total of four keys can be registered.
Enables the registering (writing and storing) of transmitter recognition codes in the
EEPROM that is contained in the certification ECU.