Toyota CAMRY 2021, Owner'S Manual

Page: 347 / 768

345
4-5. Using the driving support systems
CAMRY_GE
4
Drivin
g
■
Conditions in which the function may not operate or detect correctly
In the following situations, RSA does not operate normally and may not rec-
ognize signs, display the incorrect sign, etc. However, this does not indicate a
malfunction.
● The front camera is misaligned due to a strong impact being applied to the
sensor, etc.
●
Dirt, snow, stickers, etc. are on the windshield near the front camera.
●
In inclement weather such as heavy rain, fog, snow or sand storms.
●
Light from an oncoming vehicle, the sun, etc. enters the front camera.
●
The sign is dirty, faded, tilted or bent.
●
The contrast of electronic sign is low.
●
All or part of the sign is hidden by the leaves of a tree, a pole, etc.
●
The sign is only visible to the front camera for a short amount of time.
●
The driving scene (turning, lane change, etc.) is judged incorrectly.
●
If a sign not appropriate for the currently traveled lane, but the sign exists
directly after a freeway branches, or in an adjacent lane just before merging.
● Stickers are attached to the rear of the preceding vehicle.
● A sign resembling a system compatible sign is recognized.
● Side road speed signs may be detected and displayed (if positioned in sight
of the front camera) while the vehicle is traveling on the main road.
●
Roundabout exit road speed signs may be detected and displayed (if posi-
tioned in sight of the front camera) while traveling on a roundabout.
● The front of the vehicle is raised or lowered due to the carried load.
● The surrounding brightness is not sufficient or changes suddenly.
● When a sign intended for trucks, etc. is recognized.
● The vehicle is driven in a country with a different direction of traffic.
●
The navigation system map data is outdated.
● The navigation system is not operating.
● The speed information displayed on the meter and on the navigation system
may be different due to the navigation system using map data.
■
Speed limit sign display
If the engine switch was last turned off while a speed limit sign was displayed
on the multi-information display, the same sign displays again when the
engine switch is turned to ON.
■
If “RSA Malfunction Visit Your Dealer” is shown
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer.
■ Customization
Some functions can be customized. (

P. 154)
CAMRY_OM_General_OM33F01E