Toyota CAMRY 2021, Owner'S Manual

Page: 542 / 768

540
6-3. Do-it-yourself maintenance
CAMRY_GE
■
Initialization procedure (vehicles with a tire pressure warning system)
● Make sure to perform the initialization procedure after adjusting the tire infla-
tion pressure.
Also, make sure the tires are cold before performing the initialization proce-
dure or adjusting the tire inflation pressure.
●
If the engine switch is turned to the “LOCK” position (vehicles without a
smart entry & start system) or off (vehicles with a smart entry & start system)
during initialization, it is not necessary to restart the initialization procedure
from the beginning as it will begin automatically when the engine switch is
turned back to the “ON” position (vehicles without a smart entry & start sys-
tem) or IGNITION ON mode (vehicles with a smart entry & start system).
● If initialization has accidentally been started when it is not necessary, adjust
the tire inflation pressure to the specified level when the tires are cold and
then perform the initialization procedure again.
● Vehicles with a tire inflation pressure display function: While the position of
each tire is being determined and the inflation pressures are not being dis-
played on the multi-information display, if the inflation pressure of a tire
drops, the tire pressure warning light will come on.
■
Warning performance of the tire pressure warning system (vehicles with
a tire pressure warning system)
The warning of the tire pressure warning system will change in accordance
with the conditions under which it was initialized. For this reason, the system
may give a warning even if the tire pressure does not reach a low enough
level, or if the pressure is higher than the pressure that was adjusted to when
the system was initialized.
CAMRY_OM_General_OM33F01E