Toyota BZ4X 2023, Owner'S Manual

Page: 55 / 628

55
1-2. Child safety
Owners Manual_USA_M42C01_en
1
For
safety and secu
rity
2
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
4
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
5
While pushing the child
restraint system down into
the rear seat, allow the shoul-
der belt to retract until the
child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
6
After installing the child
restraint system, rock it back
and forth to ensure that it is
installed securely. (

P.58)
■
Forward-facing

Convert-
ible seat
1
Adjust the seat.
When using the front passenger
seat: If installing the child restraint
system to the front passenger seat
is unavoidable, refer to P.52 for
front passenger seat adjustment.
When using the rear seat: If there is
a gap between the child restraint
system and the seatback, adjust
the seatback angle until good con-
tact is achieved.
2
If the head restraint interferes
with the child restraint system
installation and the head
restraint can be removed,