Toyota BZ4X 2023, Owner'S Manual

Page: 118 / 628

118
2-2. Charging
Owners Manual_USA_M42C01_en
■ If the DC charging connector
cannot be unlocked

P.95
■ After DC charging
Even if the traction battery is
charged to the upper limit value that
is set, the level of charge displayed
on the DC charger may be lower
than the actual one.
■ Calendar settings
Charging schedule is performed
according to the date and time
shown on the multi-information dis-
play. Refer to the “Settings display”
(

P.158)
If the calendar settings check
screen is displayed when an
attempt was made to register a
charge schedule, check that the cor-
rect date is set. If it is incorrect, be
sure to correct it.
If the calendar information is wrong,
the charging schedule function will
not operate normally.
When registering the charging
schedule, the following settings
can be changed.
■
Select the charging mode
One of the two following
charging modes can be
selected.

“Start”
Starts charging at the set time
*
and finishes charging when fully
charged.

“Start-Stop”
AC charging is performed
NOTICE
■ Caution after DC charging
● Be sure to attach the DC
charging inlet cap to the DC
charging inlet and then close
the charging port lid after
removing the DC charging con-
nector from the inlet. If the DC
charging inlet cap is not closed,
foreign materials may get into
the inlet and the EV system may
be malfunctioning.
Using the charging
schedule function
AC charging can be carried
out at the desired time by
registering the charging
schedule.
Settings of the charging
schedule function