Toyota BZ4X 2023, Owner'S Manual

Page: 480 / 628

480
7-3. Do-it-yourself maintenance
Owners Manual_USA_M42C01_en
5
Press or of the meter
control switches and select
“TPWS Setting”, and then
press “OK”.
6
Press or of the meter
control switches and select
“Tire Pressure Setting”, and
then press “OK”.
7
Press or of the meter
control switches and select
“Setting by Current Pressure”
and then press “OK”.
8
Press or of the meter
control switches and select
“OK”, and then press “OK”.
The tire pressure warning light will
slowly blink 3 times and a message
indicating that tire inflation pressure
is being set will be displayed on the
multi-information display.
After setting the tire inflation pres-
sure, a message indicating that set-
ting has been completed will be
displayed on the multi-information
display.
“Setting Pressure Wait a
Moment”
■ Warning performance of the tire
pressure warning system (Set-
ting using the current tire infla-
tion pressure)
● When performing the tire pressure
setting using the current tire infla-
tion pressure, the warning timing
of the tire pressure warning sys-
tem will vary according to the con-
ditions under which tire pressure
setting was performed. Therefore,
a warning may be output even if
the tire inflation pressure drops
slightly or if the tire inflation pres-
sure increases above that when
the tire inflation pressure was set.
● Make sure to perform the tire
pressure setting procedure after
adjusting the tire inflation pres-
sure. Also, make sure the tires are
cold before performing the tire
pressure setting procedure or
adjusting the tire inflation pres-
sure.
■ Tire inflation pressure setting
procedure (Setting using the
current tire inflation pressure)
● If the power switch is turned off
while setting the tire inflation pres-
sure, the next time the power
switch is turned to ON, the setting
procedure will resume and it will
not be necessary to restart the
procedure.
● If the tire inflation pressure setting
procedure is started unnecessar-
ily, adjust the tire inflation pres-
sure to the specified level with the
tires cold and then perform setting
by selecting a specified tire infla-
tion pressure, or perform the tire
inflation pressure setting proce-
dure with the current tire inflation
pressure.
■ If the tire inflation pressure can-
not be set properly
● Normally, the tire inflation pres-
sure setting procedure can be
completed in 2 or 3 minutes.
● If the tire pressure warning light