Toyota BZ4X 2023, Owner'S Manual

Page: 477 / 628

477
7-3. Do-it-yourself maintenance
Owners Manual_USA_M42C01_en
7
Maintena
nce
a
nd ca
re
■
When rotating the tires
It is necessary to register the
position of each wheel after per-
forming a tire rotation.
Wheel position registration can
be performed by oneself. Wheel
position registration is per-
formed by driving forward with
moderate left and right turns.
However, depending on the driv-
ing conditions and driving envi-
ronment, registration may take
some time to complete.
■
Registration of the tire posi-
tion
1
Park the vehicle in a safe
place and stop the EV sys-
tem for 15 minutes or more.
2
Start the EV system
(

P.467)
Registration cannot be performed
while the vehicle is moving.
3
Press or of the meter
control switches and select
.
4
Press or of the meter
control switches and select
“Vehicle Settings”, and then
press and hold the “OK”.
5
Press or of the meter
control switches and select
“TPWS Setting”, and then
press “OK”.
6
Press or of the meter
control switches and select
“Tire Rotation”, and then
press “OK”.
7
Press or of the meter
control switches and select
“OK”, and then press “OK”.
A message is displayed on the
multi-information display. Also, “--”
is displayed for inflation pressure of
each tire on the multi-information
display while the tire pressure
warning system determines the
position.
“Setting Pressure Wait a
Moment”
8
Drive at approximately 25
mph (40 km/h) or more for
approximately 10 to 30 min-
utes.
When wheel position registration is
complete, the inflation pressure of
each tire will be displayed on the
multi-information display.
Even if the vehicle is not driven at
approximately 25 mph (40 km/h) or
more, registration can be com-
pleted by driving for a long time.
However, if initialization does not
complete after driving for 1 hour or
Registration of the posi-
tion of each wheel after
performing a tire rotation