Toyota 2006 Yaris Owner'S Manual Download Page 33 | Manualshive

Page: 33 / 618

background image

33

2007 YARIS HATCHBACK from Jan. ’06 Prod. (OM52700U)

Front passenger seat

CAUTION

The SRS front passenger airbag also
deploys with considerable force, and
can cause death or serious injury es-
pecially if the front passenger is very
close to the airbag. The front passen-
ger seat should be as far from the
airbag as possible with the seatback
adjusted, so the front passenger sits
upright.

Front seats (with SRS side airbags)

CAUTION

The SRS side airbags are installed in
the driver and front passenger seats.
Observe the following precautions.

Do not lean against the front door
when the vehicle is in use, since
the side airbag inflates with consid-
erable speed and force. Otherwise,
you may be killed or seriously in-
jured.

Do not use seat accessories which
cover the area where the side air-
bags inflate. Such accessories may
prevent the side airbags from acti-
vating correctly, causing death or
serious injury.

Do not modify or replace the seats
or upholstery of the seats with side
airbags. Such change may prevent
the side airbag system from activat-
ing correctly, disable the system or
cause the side airbag system to in-
flate accidentally, resulting in death
or serious injury.

—Seat adjustment precautions

CAUTION

Do not adjust the seat while the
vehicle is moving as the seat may
unexpectedly move and cause the
driver to lose control of the vehicle.

Be careful that the seat does not
hit a passenger or luggage.

After adjusting the seat position, re-
lease the lever and try sliding the
seat forward and backward to make
sure it is locked in position.

After adjusting the seatback, push
your body back against the seat to
make sure the seat is locked in
position.

Do not put objects under the seats.
Otherwise, the objects may interfere
with the seat−lock mechanism or
unexpectedly push up the seat posi-
tion adjusting lever and the seat
may suddenly move, causing the
driver to lose control of the vehicle.

05 12.01

«
...
31
32
33
34
35
...
»

Summary of Contents for 2006 Yaris











































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Yaris

Brand: AC Schnitzer Pages: 16

Brand: Jeep Pages: 6

Gemineye EC2014-C

Brand: Ecco Pages: 10

Reflex 5500 Series

Brand: Ecco Pages: 12

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: Nuna Pages: 17

Brand: Sears Pages: 41

Brand: A-Tach Pages: 2

Brand: Scion Pages: 24

RearSight 250-8308

Brand: Rostra Pages: 2

Brand: Hummer Pages: 31

Brand: POOL-LINE Pages: 2

Brand: Yakima Pages: 11

2011 Camry SE V6

Brand: Toyota Pages: 33

Brand: Curt Manufacturing Pages: 4

Brand: Whispbar Pages: 112

Brand: Aries Pages: 3

Brand: Acura Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands