Toyota 2006 Yaris Owner'S Manual Download Page 18

Page: 18 / 618

2007 YARIS HATCHBACK from Jan. ’06 Prod. (OM52700U)

QS12016

2. Remove the module from the key case.

QS12017

3. Remove the battery cover of the mod-

ule.

NOTICE

Do not bend the terminals.

4. Remove the discharged battery and put

in a new battery with positive (+) side
up.

NOTICE

Make sure the positive side and
negative side of the battery are
faced correctly.

Do not replace the battery with wet
hands. Water may cause unexpected
rust.

Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.

Be careful not to bend the electrode
when inserting the battery and that
dust or oils do not adhere to the
case.

Close the cover securely.

5. Install the battery cover of the module.

6. Install the module into the key case

and secure the cover.

After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.

05 12.01

Summary of Contents for 2006 Yaris











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Yaris

Reviews:

Related manuals for 2006 Yaris

Brands by name

Popular brands

Toyota 2006 Yaris, Owner'S Manual

Search results

Summary of Contents for 2006 Yaris

Reviews:

Related manuals for 2006 Yaris

Brands by name

Popular brands