Toyota 2006 Yaris Owner'S Manual Download Page 27

Page: 27 / 618

2007 YARIS HATCHBACK from Jan. ’06 Prod. (OM52700U)

PS12511

SETTING THE SYSTEM

1. Turn the ignition key to the “LOCK”

position and remove it.

2. Have all passengers get out of the

vehicle.

3. Close and lock all the side doors, back

door and hood.

Use the key to lock the last door.
When the back door is the last, turn
the key to the unlock position and then
turn to the door lock position.

The indicator light will remain on when all
the side doors, back door and hood are
closed and locked.

The system will automatically be set after
30 seconds. When the system is set, the
indicator light will start flashing.

4. After making sure the indicator light

starts flashing, you may leave the ve-
hicle.

Never leave anyone in the vehicle when
you set the system, because unlocking
from the inside will activate the system.

WHEN THE SYSTEM IS SET

Activating the system

The system will sound the alarm if any of
the side doors is unlocked or if the back
door or hood is forcibly opened without
the key.

The indicator light will come on when the
system is activated.

After one minute, the alarm will automati-
cally stop and the indicator light will starts
flashing again.

Reactivating the alarm

Once set, the system automatically resets
the alarm after the alarm stops.

The alarm will activate again under the
same circumstances described in
“Activating the system”.

Stopping the alarm

The alarm will be stopped by the following
two ways:

Turn the ignition key from the “LOCK”
to “ON” position.

Unlock any of the doors with the key.

CANCELLING THE SYSTEM

The system will be cancelled by the
above mentioned 2 ways.

If the tail lights come on for 2 seconds,
the theft deterrent system has been
alarmed. Check to see if there is any
abnormality with your vehicle.

TESTING THE SYSTEM

1. Open all the windows.

2. Set the system as described above.

The doors should be locked with the
key. Be sure to wait until the indicator
light goes off or starts flashing.

3. Unlock any side door from the inside.

The system should activate the alarm.

4. Stop the alarm as described above.

5. Repeat this operation for the other

doors, back door and hood.

If the system does not work properly,
have it checked by your Toyota dealer.

05 12.01

Summary of Contents for 2006 Yaris











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Yaris

Reviews:

Related manuals for 2006 Yaris

Brands by name

Popular brands

Toyota 2006 Yaris, Owner'S Manual

Search results

Summary of Contents for 2006 Yaris

Reviews:

Related manuals for 2006 Yaris

Brands by name

Popular brands