Toyota 2005 PRIUS Page 55 Owner'S Manual Download

Page: 55 / 450

21p016d

1. Remove the mechanical key and cover

with slide the lock knob in the arrow
direction.

21p017c

2. Remove the 4 screws to take out the

lid of the module.

NOTICE

Do not bend the terminals.

3. Remove the discharged battery and put

in a new battery with positive (+) side
up.

NOTICE

Make sure the positive side and
negative side of the battery are
faced correctly.

Do not replace the battery with wet
hands. Water may cause unexpected
rust.

Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.

Be careful not to bend the electrode
when inserting the battery and that
dust or oils do not adhere to the
case.

4. Install the lid with the 4 screws.

NOTICE

Take care not to damage or bend the
O- ring when installing.

5. Replace the mechanical key and cover

with slide the lock knob.

After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.

Summary of Contents for 2005 PRIUS



































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 PRIUS

Reviews:

Related manuals for 2005 PRIUS

Brands by name

Popular brands

Toyota 2005 PRIUS, Owner'S Manual

Search results

Summary of Contents for 2005 PRIUS

Reviews:

Related manuals for 2005 PRIUS

Brands by name

Popular brands