Toyota 2005 PRIUS Owner'S Manual Download Page 141

Page: 141 / 450

125

If the indicator or buzzer comes on...

Do this.

(a)

(red indicator and buzzer)

If parking brake is off, stop immediately and contact Toyota dealer.

(a)

(yellow indicator)

Take vehicle to Toyota dealer. If red brake system warning light is also on, stop imme-
diately and contact Toyota dealer.

(b)

(indicator and buzzer)

Fasten driver’s seat belt.

(c)

(indicator and buzzer)

Fasten front passenger’s seat belt.

(d)

Take vehicle to Toyota dealer.

(e)

See multi- information display.

(f)

Take vehicle to Toyota dealer. If red brake system warning light is also on, stop imme-
diately and contact Toyota dealer.

If any warning comes on, the hybrid system may not start by pushing the “POWER” switch. In that case, push it once again.

Service reminder indicators and warning buzzers

Summary of Contents for 2005 PRIUS



































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 PRIUS

Reviews:

Brands by name

Popular brands

Toyota 2005 PRIUS, Owner'S Manual

Search results

Summary of Contents for 2005 PRIUS

Reviews:

Brands by name

Popular brands