Toyota 2005 PRIUS Owner'S Manual Download

Page: 142 / 450

126

If the indicator or buzzer comes on...

Do this.

(g)

Take vehicle to Toyota dealer immediately.

(h)

Close all doors.

(i)

Fill up tank.

(j)

Replace engine oil

(k)

Take vehicle to Toyota dealer. If red brake system warning light is also on, stop imme-
diately and contact Toyota dealer.

(l)

Adjust tire inflation pressure. If light remains on, contact Toyota dealer.

(m)

Key reminder buzzer

Remove key.

(n)

P position reminder
buzzer

Push the “P” position switch.

If any warning comes on, the hybrid system may not start by pushing the “POWER” switch. In that case, push it once again.

Summary of Contents for 2005 PRIUS



































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 PRIUS

Reviews:

Related manuals for 2005 PRIUS

Brands by name

Popular brands

Toyota 2005 PRIUS, Owner'S Manual

Search results

Summary of Contents for 2005 PRIUS

Reviews:

Related manuals for 2005 PRIUS

Brands by name

Popular brands