Toyota 2001 Sequoia Owner'S Manual Download Page 214

Page: 214 / 325

01_SEQUOIA_U (L/O 0009)

208

2001 SEQUOIA (OM34414U)

To remove the luggage cover, detach its

hooks from the head restraints. Then,
retract and release both ends, and lift

the luggage cover out.

The position of the luggage cover can

be shifted to the rear.
To shift the position of the luggage
cover:

1. Detach its hooks from the head re-

straints. Then, retract and release both

ends, and lift the luggage cover out.

2. Move the side hole covers to the rear

holes.

3. Insert the front pole of the luggage

cover into the holes as shown in the

illustration.

NOTICE

As the plastic parts used on both
ends of the luggage cover may break

if exposed to a shock, take care not

to hit or knock them when attaching,
detaching or storing the cover.

Summary of Contents for 2001 Sequoia






































































































































































































































































































































Search results

Summary of Contents for 2001 Sequoia

Reviews:

Related manuals for 2001 Sequoia

Brands by name

Popular brands

Toyota 2001 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2001 Sequoia

Reviews:

Related manuals for 2001 Sequoia

Brands by name

Popular brands