Toyota 2001 Sequoia Owner'S Manual Download Page 86

Page: 86 / 325

01_SEQUOIA_U (L/O 0009)

2001 SEQUOIA (OM34414U)

Do not lean against the front door
when the vehicle is in use. The side

and curtain shield airbags inflate

with considerable speed and force;
you may be killed or seriously in-

jured.

Do not apply excessive weight to
the outer side of the front seats

with a side airbag, and to the front

pillar and roof side portion with a
curtain shield airbag.

Do not attach a cup holder or any
other device or object on or around

the door. When the side airbag in-

flates, the cup holder or any other
device or object will be thrown with

great force or the side airbag may

not activate correctly, resulting in
death or serious injury. Likewise,

the driver and front passenger

should not hold things in their
arms or on their knees.

Do not attach a microphone or any
other device or object around the

part where the curtain shield airbag

activates such as on the windshield
glass, side door glass and front

and side pillar. When the curtain

shield airbag inflates, the micro-
phone or other device or object will

be thrown with great force or the

curtain shield airbag may not acti-
vate correctly, resulting in death or

serious injury.

Summary of Contents for 2001 Sequoia






































































































































































































































































































































Search results

Summary of Contents for 2001 Sequoia

Reviews:

Related manuals for 2001 Sequoia

Brands by name

Popular brands

Toyota 2001 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2001 Sequoia

Reviews:

Related manuals for 2001 Sequoia

Brands by name

Popular brands