Toyota 2001 Sequoia Owner'S Manual Download Page 134 | Manualshive

Page: 134 / 325

background image

01_SEQUOIA_U (L/O 0009)

128

2001 SEQUOIA (OM34414U)

(g) “ABS” Warning Light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system works properly, the

light turns off after a few seconds. There-

after,  if  the  system  malfunctions,  the  light
comes  on  again.
When  the  “ABS”  warning  light  is  on  (and
the  brake  system  warning  light  is  off),  the

anti

−

lock brake system the traction control

system (two

−

wheel drive vehicles), the ac-

tive traction control system (four

−

wheel

drive vehicles) and the vehicle skid con-

trol  system  do  not  operate,  but  the  brake
system  still  operates  conventionally.
When  the  “ABS”  warning  light  is  on  (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during
a sudden braking or braking on slippery

road surfaces.

If either of the following conditions

occurs, this indicates a malfunction

somewhere in the parts monitored by
the warning light system. Contact your

Toyota dealer as soon as possible to

service the vehicle.

!

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

!

The light comes on while you are dri-

ving.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle  at  a  safe  place  and  contact  your
Toyota  dealer.
In  this  case,  not  only  the  anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

(h) Vehicle Skid Control System/Trac-

tion Control System (two

−

wheel

drive models) or Active Traction
Control System (four

−

wheel drive

models) Warning Lights

These lights warn that there is a problem
somewhere in the vehicle skid control sys-

tem and traction control system (two

−

wheel drive models) or active traction con-
trol system (four

−

wheel drive models).

If the “VSC/TRAC” warning light and
“TRAC OFF” (two

−

wheel drive models) or

“VSC OFF” (four

−

wheel drive models) indi-

cator light come on, have your vehicle
checked by Toyota dealer as soon as pos-

sible. However, there is no problem when

the “VSC/TRAC” warning light comes on
when the brake actuator temperature be-

comes high. (For details, see “Traction

control system” on page 140 and “Active
traction control” on page 142 in Section

1

−

6.)

The lights will come on when the ignition

key turned to “ON”, and will go off after

a few seconds.

«
...
132
133
134
135
136
...
»

Summary of Contents for 2001 Sequoia






































































































































































































































































































































Reviews:

No comments

Related manuals for 2001 Sequoia

Brand: Jeep Pages: 5

Brand: Jeep Pages: 6

Grand Cherokee SRT 2014

Brand: Jeep Pages: 345

Grand Cherokee 2015

Brand: Jeep Pages: 236

Brand: Jeep Pages: 18

Brand: Jeep Pages: 24

Brand: Jeep Pages: 560

Brand: Jeep Pages: 525

Brand: Jeep Pages: 308

Brand: Jeep Pages: 86

Brand: Jeep Pages: 638

Brand: Jeep Pages: 9

Brand: Jeep Pages: 51

Brand: Jeep Pages: 4

Brand: Jeep Pages: 50

Grand Cherokee SRT 2014

Brand: Jeep Pages: 118

2014 Grand Cherokee

Brand: Jeep Pages: 24

Brand: Jeep Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands