Toyota 2001 HIGHLANDER Owner'S Manual Download Page 94

Page: 94 / 285

’01 HIGHLANDER_U (L/O 0106)

2001 MY HIGHLANDER_U (OM48432U)

Personal lights

With moon roof

Without moon roof

To turn on the personal light, push the
switch. To turn the light off, push the
switch once again.

Windshield wipers and washer

To turn on the windshield wipers, move
the lever to the desired setting.

The key must be in the “ON” position.

Lever position

Speed setting

Position 1

Intermittent

Position 2

Slow

Position 3

Fast

For a single sweep of the windshield,
push the lever up and release it.

Summary of Contents for 2001 HIGHLANDER






























































































































































































































































































Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands

Toyota 2001 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands