Toyota 2001 HIGHLANDER Owner'S Manual Download Page 37

Page: 37 / 285

’01 HIGHLANDER_U (L/O 0106)

2001 MY HIGHLANDER_U (OM48432U)

While adjusting the seat, do not put
your hands under the seat or near
the moving parts. You may catch
and injure your hands or fingers.

1. SEAT POSITION ADJUSTING LEVER

Hold the center of the lever and pull it
up. Then slide the seat to the desired
position with slight body pressure and
release the lever.

2. SEAT CUSHION ANGLE ADJUSTING

KNOBS

Turn the knob either way.

3. SEATBACK ANGLE ADJUSTING

LEVER

Lean forward and pull the lever up.
Then lean back to the desired angle
and release the lever.

—Adjusting front seats
(manual seat)

Summary of Contents for 2001 HIGHLANDER






























































































































































































































































































Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands

Toyota 2001 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands