Toyota 2001 HIGHLANDER Owner'S Manual Download Page 182

Page: 182 / 285

’01 HIGHLANDER_U (L/O 0106)

182

2001 MY HIGHLANDER_U (OM48432U)

Operation in foreign countries

If you plan to drive your Toyota in
another country...

First, comply with the vehicle registration
laws.

Second, confirm the availability of the cor-
rect fuel (unleaded and minimum octane
number).

Three–way catalytic converter

2AZ–FE engine

1MZ–FE engine

The three–way catalytic converter is an
emission control device installed in the
exhaust system.

The purpose is to reduce pollutants in the
exhaust gas.

CAUTION

Keep people and combustible mate-
rials away from the exhaust pipe
while the engine is running. The
exhaust gas is very hot.

Do not idle or park your vehicle
over anything that might burn easi-
ly such as grass, leaves, paper or
rags.

Summary of Contents for 2001 HIGHLANDER






























































































































































































































































































Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands

Toyota 2001 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2001 HIGHLANDER

Reviews:

Related manuals for 2001 HIGHLANDER

Brands by name

Popular brands