Toyota
Tacoma
Frameless® EC Mirror w/ Compass & HomeLink®
Figure 11
12. Strip the main power harness main power
wires back 1/4 inch. Make sure to not
damage the wire strands. Twist the two
stripped ends together. Using the new
spade connector provided, connect the
black and black/white tracer wires to one
connector. Make sure the wires and spade
connector have made a good connection.
See figure 12.
Figure 13a
13. Mount the Frameless® EC Mirror
w/Compass in reverse of original factory
mirror removal. Slide and attach the
rearview mirror assembly and tighten
mirror set screw with a T20 torx bit or
driver. DO NOT over tighten screw. See
figure 13a and 13b.
Figure 13b
Do not use power tools to tighten
screw. Hands tighten only.
Note: Remove fingerprints, smudges, dirt, etc.
from mirror and windshield with glass cleaner.
Southeast Toyota Distributors, LLC.
Page 8 of 24
REV.B.10.26.15
