DS4-2731C
- 7 -
6-2. Setting the switches
6-2-1. Setting switches
(1) Detail of settings
Detail
of
settings
SW1
Used to select the data transfer
rate
SW2
SW3
Not used (used when off)
SW4
Used to switch channels
(2) Data transfer rate selection (SW1, 2)
SW1
SW2
Data transfer rate
OFF OFF 156k
ON OFF 625k
OFF ON 2.5M
ON ON Not
valid
The switches have been factory-set to “156 kbps.”
(3)
Channel select switch (SW4)
SW4 Carrier
frequency
OFF CH1
selected
ON CH2
selected
The switches have been factory-set to “CH1 selected.”
6-2-2. Station number setting switches
(1) Detail of settings
(2)
Detail
of
settings
×10 ×1
x10: Set to the first-digit value of the
station number.
X1: Set to the second-digit value of the
station number.
Set to 00 when using the monitoring
function.
01 to 64: Specifies the station number
when using the monitoring function.
65 to 99: Not valid
The switches have been factory-set to “00.”
(2) When using the monitoring function, set the station number to “01” if there is no preceding
station.
If there is any preceding station, set to the “preceding station the number of
stations occupied by the preceding station unit.”
Example: If the previous station number is “01” and two stations are occupied by the unit,
the current station number will be “03.”
0
9
8
7
6
5
4
3
2
1
0
9
8
7
6
5
4
3
2
1
