拓陽精密科技
20
Connect the glowplug battery and apply the electric starter. As soon as the engine starts,
disconnect the glowplug battery, keeping the engine running slowly on the rich needle set-ting.
(If necessary, make a slight readjustment to the throttle stick to keep the engine idling steadily.) If
the engine stops, allow it to cool for 15 seconds before restarting it. In fact, short runs interrupted
by brief cooling-off periods is good practice during running-in.
Every time you start, please keep
pressing the start button for 5 seconds to protect the starter motor life. After starting the engine,
let it warm up for 30 seconds before operating, so that the oil in the fuel can be fully lubricated to
each moving part. When the engine quickly drops from high speed to low speed, or when the
speed rises to high speed at low speed, the engine is unstable or the throttle control is slow or
flameout. Please confirm the working status of the carburetor:
●
Oil-rich
When the engine has more fuel or smoke ejection or slow acceleration, indicating that the engine
is excessively rich in oil, please rotate the main needle clockwise, with 15 degrees as a unit,
gradually reduce the main needle until the engine exhaust sound is soft and powerful, and the
Summary of Contents for FS-V400A
