5056.426D2-A
2
TC42_NG06D_060117-16
Contents of Package
•
BURNER ASSEMBLY
•
LOG GRATE
•
LOGS
•
EMBER MATERIAL
•
HARDWARE PACKAGE
Burner Installation
1. Place the keyhole slots in the burner (Figure 2) over the two screws located in the firebox base (Figure 3).
2. Slide the burner back to engage the screws in the small part of the keyhole slot and tighten screws.
3. Remove access cover from side of firebox (Figure 4).
If this fireplace is to be
used on Propane please
convert prior to installtion.
See pages 9 – 11.
Figure 1: Package contents.
Figure 2: Attaching burner to floor of
fireplace.
Bolts
Figure 3: Bolts for burner.
Figure 4: Control center
access cover.
