Ember Material Placement
A large bag of ember material is
shipped with the fireplace and needs
to be installed to ensure optimum
performance and flame appearance.
Pull apart the material into ember
size pieces (approximately 1”
squares) and gently place them into
the burner pan. Do not compress,
leave it loose for best performance.
Fill the burner pan level with the
top of the pan at rear, and gradually
slope forward to the firebox floor at
the front, covering both burner tubes.
(Figure 10)
Place remaining ember material out-
side of the burner pan as desired to
cover-up gas lines and brackets.
Note: Ember material placement
and amount will affect flame appear-
ance. More ember material results in
lower flame height. Add or remove as
needed until desired flame affect.
Figure 9: Rear deflector.
Glowing
embers
Figure 10: Ember placement.
5
TC42_NG02DN_100117-12
5056.426C8
9. Attach rear deflector to rear
of grate using the two screws
provided (Figure 9).