Figure 8: Securing the grate.
5056.426C8
4
TC42_NG02DN_100117-12
Ignition wire (red)
Flame sensor
wire (white)
Interface module
Figure 7: Interface module.
A panel set must now be
installed. See Installation and
Operating Instructions manual
for details.
6. Attach the ignition and sensor
wires to the module (Figure 7)
7. Reinstall the access panel to
the valve control box.
8. Position the slots of the grate
securing brackets over the
holes in the floor shield and
secure with the two screws
(Figure 8).
