TC36.NGST03C 031111-20
4
Fig. # 5
Fig. # 4
RED END TO
RED DOT
WHITE END TO
WHITE DOT
MODULE
BULKHEAD PLATE
2 SCREWS
4. Secure the electrical bulkhead
plate and gasket to the fi rebox.
(2 screws) Attach the ignition and
sensor wires to the module. Red
end to the connector marked
by the red dot, white end to the
connector marked by the white
dot(Fig. #4 & 5)
NOTE: If converting to propane
refer to the propane
conversion section before
continuing. Pg. 12
