TC36.NGST03C 031111-20
3
Black Diamond Burner Installation
NOTE: For the purposes of these
instructions the controls and gas
connections are on the right hand
side of the unit.
Remove porcelain panels if they
are installed.
1.
Remove the panel retainer clip
located on the upper heat shield, install
the left panel securing with panel retainer
clip previously removed. (Fig. #2)
2.
Attach the manifold assembly to the
fl oor of the fi rebox using two screws.
Seal the remaining holes in the fl oor
of the fi replace with screws. (Fig. #3).
3.
Connect the manifold fl ex gas line
and pilot fl ex gas line to the bulkhead
ensuring a gas-tight connection.
Fig. # 2
Fig. # 3
