Fig. # 5
TC36.NG03C 290411-20
4
Fig. # 4
RED END TO
RED DOT
WHITE END TO
WHITE DOT
MODULE
BULKHEAD PLATE
2 SCREWS
4. Secure the electrical bulkhead plate and
gasket to the fi rebox. (2 screws) Attach the
ignition and sensor wires to the module.
Red end to the
connector marked by
the red dot, white end to the connector
marked by the white dot(Fig. #4 & 5)
NOTE: If converting to propane refer to
the propane conversion section
before continuing. Pg. 12
