Tower Hobbies T21003, Safety And Instruction Manual

Page: 9 / 24

9
Filling With Water:
You must only use water to fill your steamer. To accelerate the warm up period, you
can use hot (not boiling) water. You can fill your steamer in one of two ways:
A. At step 1 of assembly, use a jug and pour water directly into the reservoir. Make
sure the water level is not below the MIN mark or above the MAX mark.
B. Using a jug, pour water through the filling aperture in the drip tray. Using the
water gauge on the side of your steamer, make sure the water level is not
below the MIN mark or above the MAX mark. This method is used during
steaming to keep the water level topped up as required.
WARNING: Hot steam will escape from your steamer during use. Always make
sure that the lid is securely fitted during use. Take care when removing the lid.
Always use oven gloves.
1
4
2
5
3
6